Table of Contents
- 1 What should a float plan contain?
- 2 When you see a red flag or buoy with a white diagonal stripe you must?
- 3 Where should your passengers be while the boat is tied to the dock for fueling?
- 4 How often should you change the oil in your boat engine?
- 5 What are you required to do while being overtaken?
- 6 What does every vessel operator need?
- 7 How often should you check the engine oil level on a boat?
- 8 What is the best way to avoid overloading your boat Florida?
- 9 How do you avoid overloading your boat?
- 10 How to choose a safe passenger limit for your boat?
What should a float plan contain?
You should leave a float plan that: Describes the vessel, including its registration number, length, make, horsepower, and engine type. Includes the description and license plate of the tow vehicle and trailer. Gives the number of passengers, their names and addresses, and a contact in case of emergency.
When you see a red flag or buoy with a white diagonal stripe you must?
➢ When you see a red flag with a white diagonal stripe, this indicates there are divers or snorkelers in the water. Stay at least 300 feet away when in open water, and slow to idle speed if you must come within 100 feet when in a narrow channel or river.
Where should your passengers be while the boat is tied to the dock for fueling?
Before beginning to fuel: Tie the boat securely to the fuel dock. Ask all passengers to leave the boat and go onto the dock. Do not allow anyone in your group or others at the fuel dock to smoke or strike a match.
What information should be included in a float plan quizlet?
A float plan document should include:
- Description of the vessel.
- Number of persons onboard.
- Destination, including the general route to be taken.
- Contact information.
- Timeframe of the outing.
What is the most important thing to check before launching your boat?
Make any equipment adjustments necessary and check the drain plug. Connect the fuel tank, check fluid levels and check the drain plug. Drive to the ramp and back the boat and trailer down the ramp, keeping the tow vehicle’s wheels out of the water. Set the emergency brake, shift into Park, and block the wheels.
How often should you change the oil in your boat engine?
Frequent oil changes ward off breakdowns and extend the life of your boat engine(s) by thousands of hours. Engine manufacturers typically recommend an oil change every 100 hours, and at least once a year.
What are you required to do while being overtaken?
If your vessel is being passed or overtaken by another vessel, you should maintain your speed and direction.
What does every vessel operator need?
Every operator must keep a proper lookout, using both sight and hearing, at all times. Watch and listen for other vessels, radio communications, navigational hazards, and others involved in water activities. Maintain a safe speed.
What should your passengers do when you are fueling your boat?
Ask all passengers to leave the pleasure craft and go onto the dock. Do not allow anyone in your group or others at the fuel dock to smoke, strike a match, or use a lighter. Check to see that fuel lines, connections, and fuel vents are in good condition.
What should you do to prevent a traffic jam on the boat ramp boat Ed?
What should you do to prevent a traffic jam on the boat ramp? Block the boat ramp with an unattended vehicle. Power load your boat onto its trailer instead of using the trailer’s winch. Pull your boat away from the ramp to prepare it for the drive home.
How often should you check the engine oil level on a boat?
Check the oil and fluid levels before every outing. Change the oil according to the owner’s manual. As the engine ages, increase the frequency of oil changes.
What is the best way to avoid overloading your boat Florida?
What is the Best Way to Avoid Overloading Your Boat?
- Stay Below Your Boat’s Max Weight Capacity.
- Do Not Take Extra Passengers on Board.
- Distribute Weight Evenly.
- Avoid Transporting Heavy Loads in Bad Weather.
- Do Not Overpower Your Boat.
How do you avoid overloading your boat?
The best way to avoid overloading your boat is to not load it beyond a certain limit. It is not important because the U.S federal law wants you to load within a limit. But also because you want to keep yourself and your loved ones safe in the water.
What happens if you overpower your boat?
Overpowering or overloading the boat can not only make controlling the boat difficult but may also result in capsizing and sinking. Keep reading to learn some tips to prevent such disaster from happening. First and foremost, you need to know how much your boat can handle. This means the overall weight and the number of passengers.
How to stabilize a boat with heavy items?
Try putting the heavier items at or around the center to stabilize the boat. On any vessel, you will always find a capacity plate indicating the maximum amount the boat can handle. Often, most cruisers tend to overlook the amount specified on the sign and try to make an estimation by themselves.
How to choose a safe passenger limit for your boat?
The well-known method to come with a safe passenger limit for your boat is to first find the area of the boat using length x width. Then divide the area that you get by 14-16. Use 14 for calm sea water, 15 for calm fresh water and 16, if there are mild winds or you, have planned to test your speed (High-speed day cruising ).