Table of Contents
How do I reset my Viper remote starter?
Press and hold the programming button from the remote start. This is a push button connected to a 2 pin harness off the remote start brain. On some models it is located on the antenna assembly. When the LED from the remote start brain turns on solid, the tach was programmed successfully.
How do I activate my Viper Smart Start?
After receiveing that email Follow these steps:
- From your smartphone, launch the SmartStart App.
- Go to the “Settings” tab.
- Type in your SmartStart username and password from the activation email and click the “Done” button.
- Exit the SmartStart App and relaunch it. Now you should see your vehicle(s) in the “Cars” tab.
How do I reset my Viper 7153v remote?
1: Press and hold the f button on the remote till the red light turns solid red on the remote release the button. 2: Press the remote start button on the remote till the red light flashes 3 times then release the button. The remote is now ready to program.
How do I reset my Viper alarm?
If you want to reset your Viper alarm, you can do so with your car’s fob key.
- Point the fob key toward your vehicle as the alarm sounds.
- Listen and wait for your alarm to sound for six seconds. Press the lock button on your key. Your vehicle’s Viper alarm will reset but the alarm will still be armed.
How do I reprogram my Viper 7153v remote?
Pairing the Remote: 1: Press and hold the f button on the remote till the red light turns solid red on the remote release the button. 2: Press the remote start button on the remote till the red light flashes 3 times then release the button. The remote is now ready to program.
How do you reset a Viper Auto start?
Then point the key fob at the vehicle, and press the lock button. This will reset the alarm while still leaving the car armed.If the above method does not work, put the key in the ignition, and turn it forward all the way just before cranking. Within 5 seconds, press and hold the valet/override button.
How do you reset a remote car starter?
To reset a remote starter, thrust the key into the ignition, turn it to On mode, and long press the Valet button until the horn produces a beep sound. Long press the Valet button again, and press and release your remote’s button. Release the Valet button when the horn honks.
How do you reset a Viper alarm system?
To reset a Viper car alarm, use the key fob by pointing it at the vehicle. Wait for the alarm to sound for six seconds, and then press the lock button on the key.
How do you reset remote control?
To perform a global reset of your remote control: Cover the end of the TiVo remote control with your hand. Press the TiVo button and the TV Power button simultaneously until the light at the end of the remote comes on. Press Thumbs Down 3 times, followed by Enter. The remote light should go out.