Why does my refrigerator water dispenser not work?

Why does my refrigerator water dispenser not work?

If the freezer is too cold, the water line may freeze. The water inlet valve opens to supply water to the dispenser. If the water inlet valve is defective, or if the water pressure is too low, the water valve will not open. If the water inlet valve does not have continuity, replace it.

Why did my Whirlpool refrigerator stop dispensing water?

How do you unclog a refrigerator water dispenser?

Clean the water line: Start by clipping the end of your lines closed and then pour a few cups of white vinegar into the lines that feed your icemaker and water dispenser. After about ten minutes of soaking, the vinegar will have broken down many of the lime deposits in your lines and you can flush them out.

Why does my ice maker work but not my water dispenser?

If the evaporator coils are frosted over, part of the defrost system has likely failed. The water inlet valve is an electrically-controlled valve that opens to supply water to the dispenser and ice maker. If the water inlet valve is defective, or if it has insufficient pressure, it won’t allow water to flow through.

How much does it cost to fix a refrigerator water dispenser?

Cost to Repair a Refrigerator Water Dispenser The price to fix a water dispenser ranges from $175 to $500, depending on the issue.

How do you unclog the water line on a Whirlpool refrigerator?

Unclog Refrigerator’s Water Dispenser Hose Find the water dispenser line and unscrew the screws holding it in place. Then hold the water button at the front of your fridge down to see if any water comes through. If it does, it’s likely there was an air clog in the line which should now be removed.

How do I know if my fridge water line is clogged?

Identifying Clogged Refrigerator Water Line If a water and ice dispenser line is clogged, you’ll be able to notice it very quickly. According to GE Appliances, you may either notice a slowing of the water flow or find it has stopped completely. Either of these symptoms could indicate a clogged refrigerator water line.

What can cause my ice maker to stop working?

The most common reasons for ice maker problems are:

• Pause feature enabled.
• Water line malfunction or setting.
• Clogged filter.
• Faulty water inlet valve.
• Thermostat set too low.

Why is my Refrigerator water dispenser not working?

Common solutions for: My Kenmore refrigerator water dispenser’s Not Working Water Tube in Door is Frozen. To determine if the water supply tube is frozen, disconnect the tube at the bottom of the door and blow air through Water Inlet Valve. The water inlet valve opens to supply water to the dispenser. Low Water Pressure from House Supply. Dispenser Control Board. Dispenser Switch. Door Switch. Water Filter.

Why would a water dispenser stop working?

If there is a slight dribble of a few drops of water after using the dispenser, this is normal and due to a delay in the system. If the water dripping from the dispenser is a big problem, you can purge the complete water tank and water line system. Use a large cup and press down on the dispenser for 3 minutes.

Why is my whirlpool water dispenser not working?

Troubleshooting Why the Refrigerator Water Dispenser Is Not Working You may also have a clogged water filter. This filter is either built into your refrigerator or it is “inline” of the water line behind your refrigerator. A clogged water filter will cause no water at all or very slow water dripping from the dispenser.

Why is my Refrigerator not working?

Fans not running will cause the fresh food and the freezer sections not to work. If the condenser fan (the one under refrigerator) is not working, the compressor will cut off on the overload. If the evaporator fan is not running, there will be no airflow to the freezer or the refrigerator.