What does it mean when the malfunction indicator lamp comes on?
The check engine light — more formally known as the malfunction indicator lamp — is a signal from the car’s engine computer that something is wrong. If the light begins flashing, however, it indicates a more serious problem, such as a misfire that can quickly overheat the catalytic converter.
How do you turn off the check engine light on a 2010 Kia Soul?
How Do You Reset Your Check Engine Light?
- Turn off your ignition.
- Don some safety glasses and gloves.
- Locate the negative terminal.
- Loosen the negative terminal’s nut with a wrench, then pull the connector from the battery, keeping it to the side for 30 to 60 seconds.
- Reconnect the cable and tighten with your wrench.
Why is my check engine light on in my Kia?
The most common problem that triggers the check engine light on a Kia is old spark plugs, bad oxygen sensor, dirty mass airflow sensor, or a loosengine light on a Kia is old spark plugs, bad oxygen sensor, dirty mass airflow sensor, or a loose gas sensor, dirty mass airflow sensor, or a loose gas cap.
What does the check engine light look like in a Kia Soul?
If the check engine light in your 2020 Kia Soul starts blinking, that means that the problem needs fast attention and your Kia should be transported in immediately. This blinking light usually indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system. …
Why would check engine light come on in Kia Soul?
Kia Soul Check Engine Light Flashing Other common reasons for a Check Engine Light are dirty mass airflow sensor, faulty emissions control part, damaged oxygen sensor, faulty head gasket, a malfunction with the fuel injection system, or defective spark plugs to name a few.
What does the warning light mean on a Kia Soul?
Kia Soul: Warning lights. When the parking brake is applied. When the brake fluid level in the reservoir is low. If the warning light illuminates with the parking brake released, it indicates the brake fluid level in reservoir is low.
What does the malfunction indicator light on the Check Engine light mean?
The Malfunction Indicator Light (MIL) is also known as the Check Engine Light. The purpose of this warning light is to indicate a detected problem with the car and alert the driver about the issue. The OBD2 system illuminates the light when there is a problem with the car’s engine,…
What does the Mil light mean on a Kia Optima?
If the Malfunction Indicator Lamp (MIL) illuminates, potential catalytic converter damage is possible which could result in loss of engine power. In this case, have your vehicle inspected by an authorized Kia dealer as soon as possible. This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position.
What does the parking brake light mean on a Kia?
If the Parking Brake & Brake Fluid Warning Light illuminates with the parking brake released, it indicates that the brake fluid level is low. In this case, have your vehicle inspected by an authorized Kia dealer. This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position.