Table of Contents
How do I tell what size my Kenmore washer is?
To calculate the capacity (volume) of the tub, you multiply the area by the height. For example if your washer has a tub radius of 10 inches and the height is 14 inches, you would use the mathematical equation below. Area is pi x r-squared = 3.1416 x 10-squared = 3.1416 x 100 = 314.16.
What is the cubic feet of my Kenmore Dryer Model 110?
7.0 cubic feet
I have a Kenmore dryer model number 110.87670800. I need to know what the capacity is in cubic feet. According to the model number, your Kenmore dryer has 7.0 cubic feet of capacity.
How do I decode my Kenmore model number?
The first three digits in a Kenmore model can will tell you who manufactured the appliance for Sears. For example model number 110.45862400, the first three digits are 110 so that would tell you that Whirlpool manufactured the appliance.
How can I tell how old my Kenmore washer is?
Locate the serial number on a Kenmore washer made by Whirlpool. The second letter of the serial number identifies the year the machine was manufactured.
How many cu ft is my washer?
volume = height times (diameter / 2) ^ 2 * pi. For example, my washer is 12 inches deep (a front loader) and 22 inches in diameter. 1 foot times (22/12 / 2)^2 * pi = 2.6 cubic feet.
How do you find the cubic feet of a Kenmore washer?
How to Calculate the Cubic Feet of a Washer
- Measure the depth inside the washer with a measuring tape.
- Measure the diameter of the tub.
- Divide the diameter by two, and square it.
- Multiply the number calculated in Step 3 by the depth of the tub.
- Multiply the number calculated in Step 4 by pi to determine the capacity.
How many cubic feet is a Kenmore Super Capacity dryer?
Kenmore opens up wide with 6.7-cubic-foot HE2 super capacity electric dryer. This Kenmore dryer stands at 36 inches tall and has a base with a depth of just under 29 inches and a width of 27 inches.
How do I know the capacity of my dryer?
Calculate the volume of the drum by squaring the radius. Multiply it by pi (3.14). Multiply that number by the height of the drum. This number is the capacity of your dryer in cubic feet.
Are Kenmore and Whirlpool the same?
Whirlpool makes washing machines, dishwashers, and refrigerators that bear the Kenmore badge. In addition to Whirlpool-branded appliances, the company also manufactures Amana, Jenn-Air, KitchenAid, and Maytag kitchen and laundry appliances.
How long do Kenmore washers last?
10-13 years
On average, Kenmore washers should last for at least 10-13 years. Most customers have reviewed that the product is pretty good since the company has been recognized as the top appliance brand in America. Therefore, you can rely on their products when it comes to performance and convenience.
How long should a washing machine last?
Newer washing machines are more efficient than older models. Washing machines, on average, last around 10 years, according to Consumer Reports. If your washer is reaching the threshold, or it’s been having some problems, here are some signs the end may be near.
What are the specs for Kenmore washer 110?
Kenmore 110 series washers are 27 inches deep, 27.5 inches wide and 42 inches tall at the highest point of arched control panel. The doors of the machines open upward and must be given 17 inches of top clearance to function properly. When fully loaded with laundry and water, 110 washers weigh approximately 315 pounds.
What is the capacity of the Kenmore model 110?
Kenmore 110 Series Washing Machine series washer capacity is 3.2 cu. ft . Similarly, it is asked, how many cubic feet is a Kenmore 80 series dryer? The Kenmore 80 Series starting with the 110 model number (indicating a manufacture by Whirlpool) usually has a 3.2cu. ft.
What is the capacity size of Kenmore washer model?
The Kenmore 70 series washer has a 3.5 cubic foot capacity. It comes with the Sears Triple Action agitator and can hold 28 extra-large t-shirts in a single load. Click to see full answer. Besides, what is the capacity of a Kenmore 70 series dryer? According to your model number, this dryer has 7 cu. ft. of capacity.
What is the cubic feet of my Kenmore washer Model 110?
The cubic feet of the Kenmore washer model 110 heavy duty is 2.8 cubic feet. Measured to the top water line 14.5 inches and using the radius of the tub of 10.375 inches.