How much sand do I need under my above ground pool?

How much sand do I need under my above ground pool?

The general rule is that there should be a two to three-inch base of sand under an above ground pool.

How do I know how much sand I need for my pool?

Volume = (width x length x depth) x 0.037 For a rectangular pool that’s 18 feet long by 9 feet wide, you’d need at least 1 cubic yard of sand for your base.

How much sand do I need under my Intex pool?

Just 1/2″ – 1″ of sand is more than enough to smooth out the small divots and give you a nice soft surface beneath the pool.

How many yards of sand do I need for a 24 foot round pool?

Always round up the next higher amount if they will not deliver 1/2 yards. There will generally be sand left over after the installation….Masonry Sand Volume Chart for Above Ground Pool Installations.

Pool Size	Tons	Yards
15′ Round	3	2
18′ Round	4	2.5
21′ Round	4.5	3
24′ Round	5	3

How many bags of sand do I need for a 18 foot pool?

How Much Sand Will I Need For Pool Installation?

	Amount for Sand Base with SAND COVE	Amount for Sand Base with FOAM COVE
18′ Round	2.00	1.50
21′ Round	2.50	2.00
24′ Round	3.50	2.50
27′ Round	4.00	3.00

Should I put sand under my Intex pool?

For portable pools like the Intex Easy Set Pools, sand is not recommended. Although it’s easy to put down and level and it may seem like an ideal material, it can easily erode and get partially washed away in heavy rain.

How many bags of sand do I need for a 18 ft pool?

How many square feet does a 50 lb bag of sand cover?

Regarding this, “50 lb bag of sand cover how much area?”, generally a typical 50 lb bag of sand yields 0.5 cubic feet that will cover 3 square feet area for standard 2 inch depth for excavation and backfills, for 1 inch depth, it will cover 6 square feet, for 3 inch depth, it will cover 2 square feet and for 4 inch …

How many bags of sand do I need for a 24 foot pool?

How Much Sand Will I Need For Pool Installation?

	Amount for Sand Base with SAND COVE	Amount for Sand Base with FOAM COVE
15′ Round	1.50	1.00
18′ Round	2.00	1.50
21′ Round	2.50	2.00
24′ Round	3.50	2.50

What is the best thing to put under an Intex pool?

Before deciding on what to put under your above ground pool, you need to decide on where to put your Intex pool. Popular options are grass, concrete, pavers, gravel, dirt and on decks. Concrete is probably the best option since it is usually 100% level and smooth.

How much area will a 50lb bag of sand cover?

How much sand do I need for a 18 foot Intex pool?

How Much Sand Will I Need For Pool Installation?

	Amount for Sand Base with SAND COVE
Pool Size	Yards of Sand	Tons of Sand
12′ Round	1.00	1.40
15′ Round	1.50	2.00
18′ Round	2.00	3.00

How much sand do you need for an above ground swimming pool?

An average 18-foot round aboveground swimming pool requires about 3 tons or 2.5 cubic yards of sand to provide a 2-inch base. The cost for a cubic yard of masonry sand varies, but $48 is about average.

Can you put sand under an above ground pool liner?

Sand is used under an aboveground pool to protect the pool’s vinyl liner from rocks and objects that could tear the liner. Also, sand under an aboveground pool acts as cushioning for its floor, making it more comfortable for feet. The standard depth of sand that should be used under an aboveground pool’s floor is 2 inches.

How is an above ground pool installed?

Once the hole for an aboveground pool’s floor is dug, it’s typically padded with a layer of sand before the pool is installed. Sand is the recommended base material upon which an aboveground pool should sit.

How much sand do I need to level my area?

Note that this calculator adds 3 feet to your diameter and calculates the sand to level your area. It then calculates an additional 2 inches of sand to place over the leveled area. If you have more than 2″ to level out, you should level out your area by removing soil from the high side first. Then remeasure.